Arris VIP2500 User's Guide download pdf (Page 19)

Touchstone TM402 Telephony Modem User’s Guide 20

Getting Battery USB Ethernet

Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary

Mounting the Telephony Modem

You can either mount the Telephony Modem on a wall or place it on a desktop. For

wall-mount applications, you can mount the Telephony Modem with the indicators

facing upward (vertical) or to the size (horizontal).

Tools and Materials

For wall-mounted installations, make sure you have the following tools and mate-

rials before proceeding:

• for mounting on drywall: Two 1/4” (6mm) drywall anchors and a Drill with

1/4” (6mm) bit

• for mounting on plywood or studs: two #6 x 1.5” (38.1 mm) self

tapping

screws (included); the head diameter should be approximately

1/4”

(6 mm)

and a drill with a 1/8” (3mm) bit

• screwdriver (flat-blade or Phillips, depending on what kind of screws you

use)

• wall-mount template (included with the Telephony Modem Quick Installation

Guide)

• transparent tape (for temporarily securing the mounting template to the

wall)

Location

Always position the Telephony Modem:

• within 4 feet (1.3 m) of an AC outlet. The power cord must reach the outlet

without stretching and without adding extension cords.

• near a cable outlet (to avoid long cable runs).

Note: When mounting the Telephony Modem on drywall, try to position the Te-

lephony Modem so at least one of the screws are fastened to a stud. This

may prevent the Telephony Modem from pulling out of the wall in the fu-

ture.

To prevent overheating your Cable Modem, do not block the ventilation

holes on the sides of the unit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 60 61

No comments

Arris VIP2500 User's Guide Page 19