Arris VIP2500 User's Guide download pdf (Page 20)

Touchstone TM402 Telephony Modem User’s Guide 21

Getting Battery USB Ethernet

Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary

Instructions

Wall-mounting instructions

1 Print out the Telephony Modem Wall Mounting Template.

2 Position the mounting template on the surface where you intend to mount

the Telephony Modem and secure in place with transparent tape.

3 Drill holes through the template in the specified locations for the mounting

screws. After drilling holes, remove the template from the surface.

4 If using drywall anchors, set them into the wall. Then, drive the screws into

the wall leaving a gap of about 1/8” (3 mm) between the screw head and

the wall. If not using anchors, just drive the screws.

5 Orient the Telephony Modem with the indicator lights facing up or right, as

desired. Slip both mounting slots (in the back of the Telephony Modem) over

the screws, then slide the case down until the narrow end of the keyhole slot

contacts the screw shaft.

6 Proceed to Connecting the Telephony Modem

Desktop mounting instructions

1 Position the Telephony Modem so that:

• air flows freely around it

• the back faces the nearest wall

• it will not fall to the floor if bumped or moved

2 The TM402A and TM402B have an oval foot on the side to provide stability

in the event that the Telephony Modem is positioned vertically on a surface.

If you want to stand the Telephony Modem up on its side, pull the oval foot

out slightly, twist the foot (as shown in the image to the left), and place the

Telephony Modem in the desired location.

3 Proceed to Connecting the Telephony Modem

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 60 61

No comments

Arris VIP2500 User's Guide Page 20