Arris VIP2500 User's Guide Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 61
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Touchstone TM402 Telephony Modem User’s Guide 11
Getting Battery USB Ethernet
Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary
Ethernet or USB?
There are two ways to connect your computer (or other equipment) to the Telepho-
ny Modem. The following will help you decide which is best for you:
Ethernet
Ethernet is a standard method of connecting two or more computers into a Local
Area Network (LAN). Use the Ethernet connection if your PC has built-in Ethernet
hardware, does not use Windows, or you want to share the Telephony Modem con-
nection with several computers.
Note: To connect two or more computers to the Ethernet port, you will need a
hub or broadband router (available at computer retailers).
The Telephony Modem package comes with a 6-foot (1.9m) Ethernet cable (the
connectors look like wide telephone connectors); you can purchase more cables if
necessary at a computer retailer. If you are connecting the Telephony Modem di-
rectly to a PC, or to an Ethernet hub or broadband router with a cross-over switch,
ask for Category 5 (CAT5) straight-through cable. If you are connecting the Tele-
phony Modem to an Ethernet hub or broadband router without a crossover switch,
ask for a Category 5 crossover cable.
USB
USB (Universal Serial Bus) is meant for connecting a variety of accessories, such
as keyboards, mice, printers, and communications devices (including Telephony
Modems) to a single PC. Use the USB connection if you have only one computer,
and the computer is using a Windows operating system (Windows 98 Second Edi-
tion or later), and has no built-in Ethernet hardware. The Telephony Modem pack-
age comes with a 5-foot (1.6m) USB cable.
Both
If you have two or more computers, you can connect one computer to the Telepho-
ny Modem’s USB port and one or more other computers to the Ethernet port. To
connect two or more computers to the Ethernet port, you will need a hub or broad-
band router (available at computer retailers).
For more information about connecting two or more computers, contact your cable
service provider.
Ethernet Cable
USB Cable
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 60 61

Comments to this Manuals

No comments