Arris IPC1100 User Manual download pdf (Page 37)

Installation

IPC1100 Advanced IP Client Video Set-top • Installation and Operations Manual

365-095-24769 x.1 10/13

Operational Check for the Remote Control

The operational check tests communication with the remote control:

Feature Testing Procedure

Power on

Press

power

on the remote control to turn on the IPC1100.

Tune the television to the output channel (3 or 4) if using the RF output.

Channel selection

Scan through the channels using the channel + or - keys.

Tune to several channels by entering the channel number using the numeric

keys.

Volume control

Press volume + or - on the remote control to increase the volume to its

upper limit, lowest level, and to a comfortable level.

Press mute to turn the sound off. Press mute again to restore the sound.

Note: The volume test cannot be used if the HDMI connection to the TV has

been chosen.

If the IPC1100 does not operate properly, refer to the Troubleshooting section.

BUI Access

The Basic User Interface (BUI) Menu provides a method to retrieve diagnostics without powering off the

application.

Recommended Method for Access to OSD Diagnostics functionality

It is recommended to enter OSD Diagnostics through the BUI Menu:

1. Press and hold the “D” key on the IR remote for 5 seconds, then release the key. The BUI Main

Menu is shown in Figure 23.

a. From the BUI Menu, the user can select and navigate to Diagnostics.

b. From the BUI Menu, the user can select and navigate to User Setting Menu.

2. The alternate method of accessing the diagnostics is to power on the IPC1100 and then

immediately press the select key twice (or the OK key) of the remote.

Note: The the MotoPLYR diagnostics are not available once the system has booted up, and therefore are

grayed out on the BUI Main Menu. For information and instructions related to MotPLYR, please refer to the

MotoPLYR-Client Installation and Operation Manual Version 1.3 (VMS).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 82 83

No comments

Arris IPC1100 User Manual Page 37