Arris IPC1100 User Manual download pdf (Page 25)

Installation

IPC1100 Advanced IP Client Video Set-top • Installation and Operations Manual

365-095-24769 x.1 10/13

Installation Overview

1. Determine if you are connecting to a:

Device Connection

High-Definition TV or monitor

Use the component video (YPbPr) or the HDMI output. No other video connection

supports HDTV.

If the TV has no HDMI input but does have a DVI input, connect a DVI-to-HDMI adapter or

cable to the HDMI out connector on the IPC1100 set-top, and the DVI-HDTV connector on

your TV. Note: A separate audio connection will be needed.

Standard- Definition TV

Connect the composite video connector using a composite (RCA phono) cable. If the TV

only has a coaxial RF input, connect it to the IPC1100 RF OUT connector

2. Determine if you are connecting the audio to a home theater receiver or directly to the TV:

ο For an HDMI video connection, no additional audio connections to the TV are required.

ο For a DVI video connection, additional audio connections to the TV are required.

ο If the receiver or TV has a digital audio (S/PDIF) input, use the digital audio OPTICAL (S/PDIF)

output.

ο Otherwise, use the baseband left and right audio outputs.

3. Locate the cabling diagram(s) that best match the subscriber’s configuration.

4. Connect the audio and video cables in a manner matching that diagram.

5. Determine if you are connecting to a data device (see Data Device Connections in this section). For

installation details, refer to the instructions included with the data device.

6. Connect the cable terminal to the coaxial cable wall outlet.

7. Perform the operational check for the remote control.

8. Optimize the high-definition settings. See Optimizing the High-Definition Settings in this section.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 82 83

No comments

Arris IPC1100 User Manual Page 25