Arris Touchstone WTM552 User's Guide Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 79
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
Touchstone® WTM552 Telephony Modem User’s Guide 62
Getting Battery Wireless Ethernet
Safety Started Installation Installation Configuration Configuration Usage Troubleshooting Glossary
Indicator Lights for the WTM552G/H Models
The Touchstone Telephony Modem has fourteen indicator lights to assist in trouble-
shooting.
Wiring Problems
If the Telephony Modem begins flashing all its lights for more than 10 seconds, this
indicates a problem with the telephone wiring — the red and green wires may be
shorted (touching), or there may be undesired voltage on the lines. If this pattern
persists for more than 10 seconds, disconnect the telephone lines from the Tele-
phony Modem, then call a wiring technician for assistance.
Patterns: Normal Operation (LAN and Telephone)
The following table shows light patterns for the Ethernet and wireless LANs, and the
telephones, during normal operation.
Mode LAN1 - LAN4 WLAN DMZ Tel. 1/Tel. 2
AC Power
On = Computer
Connected
Off = Computer
not connected
Flash =
Computer
Activity
On = Computer
Connected
Off = Computer
not connected
Flash =
Computer
Activity
On = DMZ
enabled
Off = DMZ not
enabled
On = On-hook
Flash = Off-hook
Off = disabled
No AC Power Off Off Off
On = On-hook
Flash = Off-hook
Off = disabled
Firmware
Upgrade
(normal
operation)
(normal
operation)
(normal
operation)
Off
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 78 79

Comments to this Manuals

No comments